Windows NT Dialup Configuration
  • From the desktop, double-click My Computer.
  • Double-click Dial-up Networking.
  • If you receive a message stating that The phonebook is empty..., then click OK to add a new entry.
  • If Dial-up Networking (DUN) already has other phone book entries, click New.
  • If the New Phonebook Entry Wizard window appears, check the box labeled I know all about phonebook entries... and click Finish.

  • In the New Phonebook Entry dialog, select the Basic tab.
  • Check Use Telephony dialing properties.
  • Uncheck Use another port if busy.
  • For Entry name, enter Hanson Information Systems.
  • Enter the country code and area code of the number you are dialing, plus the phone number itself.
  • Under Dial using, select your modem.

  • Click the Configure button.
  • Set the Initial speed (BPS) to the highest value.
  • Make sure all three Hardware Features boxes are checked (if applicable) and that Disable modem speaker is not checked.

  • Click the OK button.
  • Select the Server tab.
  • The Dial-up server type should be PPP: Windows NT, Windows 95 Plus, Internet.
  • For Network Protocols only TCP/IP should be checked.
  • Make sure Enable software compression is checked, but Enable PPP LCP extensions unchecked

  • Click the TCP/IP settings button.
  • Select Server assigned IP address and Server assigned name server addresses.
  • Leave the Primary WINS and Secondary WINS servers at 0.0.0.0.
  • Check both Use IP header compression and Use default gateway on remote network.

  • Click the OK button.
  • Select the Script tab.
  • Make sure None is selected.

  • Select the Security tab.
  • Select Accept any authentication including clear text.

  • On the New Phonebook Entry window, click OK.
  • You will now be in the Dial-up Networking program, and the phone book entry you just created should be selected in the Phonebook entry to dial text box.
  • Click the Dial button.

  • A window will appear asking for a username, enter it.
  • Do not enter anything for the Domain.
  • There is also an option to Save Password, which can be selected if desired.

  • Click OK to dial into Hanson Information Systems.
  • Once you are connected, a window will appear informing you that you have successfully connected to the Dial-up Server. Click OK to close this window.
  • You are now connected and may use any internet software such as Internet Explorer (installed with Windows NT)

Copyright © 2005 All Rights Reserved.
Family Net is a division of Hanson Information Systems, Inc.

Hanson Information Systems
2433 West White Oaks Drive
Springfield, Illinois 62704
Phone: (217) 726-2400
Fax: (217) 726-3239
Toll Free: (888) 245-8468


 





Configuration
Mail Settings
Access Numbers
Spyware
Popular Links